Trigger Pressure Sensor Issue

Skill Level
Amateur/Hobby Shooter
Primary Discipline
Air Pistol
SCATT Experience
Over 5 years
Joined
Mar 11, 2020
6 Posts
3 Helpful Votes
0 Best Q&A Answers
Hello,
I have a question about my Scatt trigger pressure sensor specific to air pistols: For the last second before the shot, the trigger sensor is maxed out at 100% on the graph (or even higher than 100%???). Does anyone know if it is possible to adjust the trigger pressure axis to go from say 80%-100% instead of 0-100, or to adjust the sensitivity of the sensor so I can get more useful information from it?
Thanks,
Ryan
 

Peter

Administrator
Skill Level
Amateur/Hobby Shooter
Joined
Sep 9, 2019
487 Posts
362 Helpful Votes
6 Best Q&A Answers
Hello,
I have a question about my Scatt trigger pressure sensor specific to air pistols: For the last second before the shot, the trigger sensor is maxed out at 100% on the graph (or even higher than 100%???). Does anyone know if it is possible to adjust the trigger pressure axis to go from say 80%-100% instead of 0-100, or to adjust the sensitivity of the sensor so I can get more useful information from it?
Thanks,
Ryan
Hello there,

Let's try updating your trigger sensor's firmware first:

- Close your SCATT training software
- Then download and boot the following program, a blank window will appear with a "Plug in device to update" header
- With the application window open plug the sensor - the program shall detect the device (some text will show up) and enable the "Update" button in your bottom-left corner in case an update is available. Hit the Update button and wait for it to complete :)
 
OP
R
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Air Pistol
SCATT Experience
Over 5 years
Joined
Mar 11, 2020
6 Posts
3 Helpful Votes
0 Best Q&A Answers
It's working! Thanks Peter.
 
Top