Setup on steyr

Your highest shooting achievement
572
Skill Level
Professional
Primary Discipline
Air Pistol
SCATT Experience
Just Lurking
Joined
Apr 9, 2020
1 Posts
0 Helpful Votes
0 Best Q&A Answers
Please provide setup on steyr LP10
 
Your highest shooting achievement
Final at AirOShoot
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Air Pistol
SCATT Experience
3 years
Joined
Mar 10, 2020
93 Posts
65 Helpful Votes
2 Best Q&A Answers
You need this fastener. It is very comfortable and also good for the Steyr Evo 10 model. I wish it existed for more pistols (like Feinwerkbau P8X)
 

Peter

Administrator
Skill Level
Amateur/Hobby Shooter
Joined
Sep 9, 2019
491 Posts
380 Helpful Votes
6 Best Q&A Answers
You need this fastener. It is very comfortable and also good for the Steyr Evo 10 model. I wish it existed for more pistols (like Feinwerkbau P8X)
I think this very gap highlighted below should be enough for the supplied mounting plate to slide in, no?
1586458298229.png
 
Your highest shooting achievement
Final at AirOShoot
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Air Pistol
SCATT Experience
3 years
Joined
Mar 10, 2020
93 Posts
65 Helpful Votes
2 Best Q&A Answers
I think this very gap highlighted below should be enough for the supplied mounting plate to slide in, no?
View attachment 128
I can slide it unscrewing the cylinder a bit and adding some pressure. This has already peeled part of the sticker and I'm afraid it will end up eating out the rubber stop that the cylinder rests against. After using the Steyr fastener, I prefer the comfort of having the fastener on the side of the weight rail and only add and remove the sensor :)
 

Peter

Administrator
Skill Level
Amateur/Hobby Shooter
Joined
Sep 9, 2019
491 Posts
380 Helpful Votes
6 Best Q&A Answers
I can slide it unscrewing the cylinder a bit and adding some pressure. This has already peeled part of the sticker and I'm afraid it will end up eating out the rubber stop that the cylinder rests against. After using the Steyr fastener, I prefer the comfort of having the fastener on the side of the weight rail and only add and remove the sensor :)
Totally makes sense, Ramon. I will forward it to our manufacturing guys and we'll se what can be done for this model.
By the way, what "sticker" are we talking about exactly? (just to make sure that we are on the same page)
 
Your highest shooting achievement
Final at AirOShoot
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Air Pistol
SCATT Experience
3 years
Joined
Mar 10, 2020
93 Posts
65 Helpful Votes
2 Best Q&A Answers
Awesome :)
feinwerkbau-p8x-sticker-reduced.jpg
 
Your highest shooting achievement
Catalan champion 9mm
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Centerfire Pistol
SCATT Experience
3 years
Joined
Mar 10, 2020
8 Posts
2 Helpful Votes
0 Best Q&A Answers
For the Steyr Evo and LP 10 I use the metal tape attachment that comes with the kit. Works OK. I have tried the side mount but it added aot of weight to one side of the pistol.
I have also have used a 3D printed mount someone gave me but it can be bumped and you lose your zero.
 

Attachments

Your highest shooting achievement
Catalan champion 9mm
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Centerfire Pistol
SCATT Experience
3 years
Joined
Mar 10, 2020
8 Posts
2 Helpful Votes
0 Best Q&A Answers
I think this very gap highlighted below should be enough for the supplied mounting plate to slide in, no?
View attachment 128
Putting it here is really going to change the handling of the gun. It doesn't take much of a gap to slide the steel tape attachment.
 
Your highest shooting achievement
Final at AirOShoot
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Air Pistol
SCATT Experience
3 years
Joined
Mar 10, 2020
93 Posts
65 Helpful Votes
2 Best Q&A Answers
I had issues with the old mount for SCATT USB, which had to be slided. I have not tried with the new one (no longer using Steyr) but I can see how it would be easier.
 
Your highest shooting achievement
484 - SCATT Open Tournament (May 2020)
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Air Pistol
SCATT Experience
Just Lurking
Joined
Apr 9, 2020
22 Posts
38 Helpful Votes
0 Best Q&A Answers
Here is my setup. Can easily slide up and down the cylinder.
 

Attachments

Your highest shooting achievement
noveno puesto en el campeonato de europa 2020
Skill Level
Professional
Primary Discipline
Air Pistol
SCATT Experience
Over 10 years
Joined
Apr 7, 2020
3 Posts
1 Helpful Votes
0 Best Q&A Answers
[QUOTE = "400driver, publicación: 551, miembro: 152"]
Para el Steyr Evo y LP 10 utilizo el accesorio de cinta de metal que viene con el kit. Funciona bien He intentado el montaje lateral pero agregó mucho peso a un lado de la pistola.
También he usado una montura impresa en 3D que alguien me dio, pero puede ser golpeada y pierdes tu cero.

Bonita pieza para el scatt, me suena de algo pero creo recordar que se la di a Pablo Garcia en Municht????
 
Your highest shooting achievement
Catalan champion 9mm
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Centerfire Pistol
SCATT Experience
3 years
Joined
Mar 10, 2020
8 Posts
2 Helpful Votes
0 Best Q&A Answers
Pablo gave it to me:)
 

Peter

Administrator
Skill Level
Amateur/Hobby Shooter
Joined
Sep 9, 2019
491 Posts
380 Helpful Votes
6 Best Q&A Answers
I wish it existed for more pistols like Feinwerkbau P8X
Hello Ramon,

A little update on the P8X: we'll try to design and manufacture a new mounting solution, just got a confirmation in that regard
But it won't come soon due to all the hickups caused by COVID-19

Just wanted to tell you that I we haven't forgotten about this one :)
 
Your highest shooting achievement
CLSTSA 2020
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Air Pistol
SCATT Experience
Less than 1 year
Joined
Mar 11, 2020
5 Posts
3 Helpful Votes
0 Best Q&A Answers
For the Steyr Evo and LP 10 I use the metal tape attachment that comes with the kit. Works OK. I have tried the side mount but it added aot of weight to one side of the pistol.
I have also have used a 3D printed mount someone gave me but it can be bumped and you lose your zero.
Would you be able to send pictures from all angles of the mx-w2 mounted on the side of the evo10 pistol using the side mount?
 
Your highest shooting achievement
340
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Air Pistol
SCATT Experience
Just Lurking
Joined
Oct 25, 2020
1 Posts
0 Helpful Votes
0 Best Q&A Answers
Hi!
Scatt basic here ;-)
I've made two dummy cylinders, one from thin wall 28mm steel pipe and another from 25mm aluminium rod drilled inside.
Both with Scatt unit weigh same as steyr stock cylinder.

evo10_scatt.jpgevo10_scatt2.jpg
 
Your highest shooting achievement
558
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Air Pistol
SCATT Experience
Less than 1 year
Joined
Mar 10, 2020
1 Posts
1 Helpful Votes
0 Best Q&A Answers
I placed the Scatt as far forward as possible. It here where the muzzle vibrations are and I want the camera to pick those up as a part of seeing what I'm doing right or wrong. Sure the weight will be a bitt of, but you have to see the pros and cons.
 
Your highest shooting achievement
484 - SCATT Open Tournament (May 2020)
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Air Pistol
SCATT Experience
Just Lurking
Joined
Apr 9, 2020
22 Posts
38 Helpful Votes
0 Best Q&A Answers
I put it there hoping to reduce vibrations... That is my understanding of the effect of putting a weight on the barrel.
 
Your highest shooting achievement
County Champion
Skill Level
Amateur/Hobby Shooter
Primary Discipline
Air Pistol
SCATT Experience
Over 10 years
Joined
Mar 19, 2021
3 Posts
1 Helpful Votes
0 Best Q&A Answers
I use standard V mount and an old 700c bike innertube like Karate kid easy on easy off, I also have the weight side mount but prefer the innertube method
 

Attachments

Top