Search results

  1. M

    Shot ISSUE

    Has anyone had an issue with the MX-02 that After you calibrate the sensor and shoot 2 sighter shots that the next shots are way off call. Both of my sighter shots were 10.4 and 10.1 then my shots dropped out the bottom. I was like no way. Nothing changed
  2. M

    Scatt Analysis

    it looks like you are trying to come up from the bottom. You need to adjust your NPA so you are coming DOWN from the top and you settle center
  3. M

    aiming Area

    Hey gang. I'm still trying to get a grip shooting with a Scope. We really don't have any coaches here in Hawaii. So I try to use the scatt as much as possible. But what I have been seeing with my slow fire shooting is I have a habit of hitting low right, Now I have corrected my trigger finger...
  4. M

    making correction with the scatt during live fire

    Thanks for the information
  5. M

    making correction with the scatt during live fire

    I know how to make corrections during dry fire, but I'm now sure what to do during live fire. When I make a shot the scatt calls the shot a 10.8, but the shot was actually is low 9. I tried making the correction as a 9. but that just made things worst.
  6. M

    Target lighting

    Cool I'm trying to buy one. I have not heard back from Scatt on paying for it.
  7. M

    Target lighting

    Does anyone have experince using this Paper target holder with integrated light LB-01
  8. M

    Display aming Zone

    So I have been trying hard to improve my prone Position and practice with the MX-02 System. What I noticed today is When I'm in the position and roll over on my gun. my NPA is just above the center of the target. When I settle I'm aiming center, but when I go back and replay the shot. The...
  9. M

    black circle

    ok I will try that in the morning
  10. M

    Inaccurate impacts

    Paper target holder with integrated light LB-01 Does anyone know where you can buy this in the USA
  11. M

    black circle

    When you are calibrating and you shoot with the Black circle. How important is it to have the shot in the middle of the circle
  12. M

    calibration

    This is how the electronic correction is programmed. More often than not, if you drag an electronic hole directly to the place of a real one, the group will shift too much. That is, if on the screen a shot falls into size 7 at 7 o'clock (with a real shot at 10), an amendment to the inner top ten...
  13. M

    calibration

    DONE. I had a Phone conference with Scatt USA and we were able to get me back on track. My System is working fine now. Thanks for your answers
  14. M

    Distance and focus ring on the MX-02

    nope that did not work shoots
  15. M

    Distance and focus ring on the MX-02

    ok this is what I'm seeing. So I messed up early and used an allen wrench and moved the pointer. So once I went back and read the instruction again I tried to put it back where is was and then moved the distance dial, and this is what I see now
  16. M

    Distance and focus ring on the MX-02

    ok I have another question, because I know I messed up. Instead of turning the Lens tightening screw. I got a allen wrench and turned the focus pointing ring. but now I can not find the allen wrench I used. Do you know what size it is and what the default setting the pointer should have been on
  17. M

    Distance and focus ring on the MX-02

    what is the difference between Distance dial and the focus ring on the Scatt MX-02
  18. M

    Scatt MX-W2

    were you using the iris Diaphragm. Light is a big issue. The target has to be lite up. Yes even outside you still that to think about light. I was told that the claibration target is bigger for one but when you switch over to your practice target. It's smaller and your mistakes are amplified. If...
  19. M

    calibration

    IC . This is work in Progress. Now what I think is throwing me off is. I have my Red dot clear, but now the bulleye is too blury. So as I try to aim center. I'm all over the place. I'm using a FireDot Bull-Ring Reticle.
  20. M

    calibration

    So I calibrated the System and when I shoot it come up center, 3 shots on top of each other, but when I change over to practice the shots are all over the place. Even when I make a correction move the next shot is way off call. What am I doing wrong? Distance is 5.1 I'm using the MX-W2
Top